Blog

This corresponds to the dependence of the insertion loss of passive components to the signal state of polarization (SOP).

The signal transmission quality is not stable over a long period of time because of the polarization effects occurring along...

The optical spectrum analyzer (OSA) is the device typically used to measure OSNR. Signal and noise measurements are made over...

Active sources such as optical plugs, lasers, receivers, and amplifiers generate noise in the fiber link.

Compared with requirements for EDFAs for terrestrial applications and for Submarine applications, there are major important differences making the two...

High Chromatic Dispersion (CD) Robustness Can avoid Dispersion Compensation Units (DCUs) No need to have precise Fiber Characterization Simpler Network Design Latency improvement due to no DCUs High Polarization Mode Dispersion (PMD) Robustness High Bit Rate Wavelengths deployable on all Fiber types No need for “fancy”PMD Compensator devices No need to have precise Fiber Characterization Low Optical...

Electronic Dispersion Compensation (EDC) is a technology that can help overcome the power losses that occur in optical link budgets.

Two types of DCM are used in the DWDM link and are called post-compensation and pre-compensation

Dispersion slope compensation module (DSCM), can be added to an existing fiber link to compensate for high link dispersion totals.

Laser spectral width, modulation method, and frequency chirp. Lasers with wider spectral widths and chirp have shorter dispersion limits. It...